Adorable Amigurumi Cat Jeremy: Free Crochet Pattern

Meet Jeremy, the cutest addition to your amigurumi collection! This free crochet pattern brings to life an adorable amigurumi cat that is sure to delight both beginner and experienced crocheters alike. With detailed instructions and step-by-step photos, crafting Jeremy is a joyous experience. Whether you’re creating a playful gift for a loved one or simply indulging in your passion for crocheting, this project is perfect for unleashing your creativity. Get your yarn and hooks ready, and let’s crochet Jeremy together!

Required materials and tools: 

Yarn – Gazzal Baby Cotton half-cotton 50g / 165m, color No. 3430 (gray), color 

No. 3438 (dark blue), color No. 3431 (jeans), color No. 3432 (white), color No. 3443 (Red poppy) 

Hook №2 

Filler – holofiber 

Beads for eyes with a diameter of 6mm 

A bit of black, white and pink yarn for embroidery 

Needle for stitching, scissors, pins, marker for knitting 

Cut fabric size 27 * 9 cm (for scarves) 

Buttons – 2pcs 

Sewing machine (optional) 

Abbreviations: 

  Magic ring – Magic ring 

  sc– single crochet 

  Ch – Chain 

  inc – increase 

  Dec – Decrease 

  sl-st – slip stitch 

  DC – double crochet 

 The size of the finished toy using these materials is about 20 cm 

Arms 

Link two parts. Stuff in the process of knitting. Tightly fill the bottom,further fill medium, the top part is not necessary to fill. 

Start in gray: 

1: Magic Ring 6sc 

2: 6 inc (12sc) 

3-6: 12sc 

Change color to white. 

7-8: 12sc 

Change the thread to dark blue. 

9-10: 12sc 

Change color to white. 

11-12: 12sc 

Change the thread to dark blue. 

13-14: 12sc 

Change color to white. 

15-16: 12sc 

Change the thread to dark blue. 

17-18: 12sc 

Change color to white. 

19-20: 12sc 

Change the thread to dark blue. 

21-22: 12sc 

Change color to white. 

23: 12sc 

Knit another 6sc, then fold the edges of the parts together, knit 6sc. 

Thread to fasten, cut off. 

Tail: 

Stuff in the process knitting. Tightly fill the bottom, then to fill medium, the upper part is not necessary to fill. 

Knit in gray: 

1: Magic ring into 6sc 

2: binc in each loop (12sc) 

3-25: 23 row 12sc 

Fold the edges of the parts together, knit 6sc. Thread to fasten, cut off. 

Legs + Body: 

First knit the first leg. Legs and body tight stuff in the knitting process. 

Start in gray: 

1: Magic ring 6sc 

2: 6inc (12sc) 

3: (1sc, inc) * 6 (18sc) 

4: 1sc, inc, (2sc, inc) * 5, 1 sc (24sc) 

5-7: 24sc 

8: 6sc, 6dec, 6sc (18sc) 

9: (4sc, dec) * 3 (15sc) 

10-12: 15sc 

13: (4sc, inc) * 3 (18sc) 

14-16: 18sc 

17: (5sc, inc) * 3 (21sc) 

Knit another 7sc, sl-st. Finish knitting, thread to fasten and cut. 

Tie the second leg in the same way as the first, but after 17 rows, knit another 18sc. 

The thread does not cut, and continue to knit the body. (You may need another the number of loops after the 17th row, then you need to adjust it yourself.) 

18: from the second leg dial a chain of 6ch and attach to the first leg where finished knitting (in the loop following ss). Make sure the legs look straight. 

Next knit 21sc on the first part, 6sbn chain of air loops, 21sc on the second part, 6sc on the back chains of air loops (54sc) 

In this place you need to set the marker (marker is in front) 

19-26: 54sc (8 rows) 

In the next row you need to engage the tail. 

Make sure that the tail is located exactly in the middle. 

27: 22sc, 6sc (to bind a tail), 26sc (54sbn) 

28: (7sc, dec) * 6 (48sc) 

Next, you need to align the marker exactly middle of the back. For this I needed knit 22sc (you might need knit a different number of loops), and in 

Next loop change color to dark blue. Now here will be the beginning of the next row, set the marker. 

29-30: 48sc 

Change color to white. 

31: 48sc 

32: (10sc, dec) * 4 (44sc) 

Change the thread to dark blue. 

33-34: 44sc 

Change color to white. 

35-36: 44sc 

Change the thread to dark blue. 

37-38: 44sc 

Change color to white. 

39: 44sc 

40: (9sc, dec) * 4 (40sc) 

Change the thread to dark blue. 

41-42: 40sc 

Change color to white. 

43: (8sc, dec) * 4 (36sc) 

In the next row you need to knit handles. 

Make sure that they are located symmetrically on the sides of the body. 

44: 9sc, 6sc (to knit the handle), 12sc, 6sc (tie in the handle), 3sc (36sc) 

Change the thread to dark blue. 

45: (4sc, dec) * 6 (30sc) 

46: 30sc 

Change the thread to gray. 

47: (3sc, dec) * 6 (24sc) 

48-49: 24sc 

Taurus is ready. Further, without tearing the threads, continue to knit your head. We fill very tightly 

Head: 

50: inc in each loop (48sc) 

51: (7sc, inc)*6 (54sc) 

52: 4sc, inc, (8sc, inc)*5, 4sc (60sc) 

53-64: 60sc  

65: 4sc, dec, (8sc, dec)*5, 4sc (54sc) 

66: (7sc, dec)*6 (48sc) 

67: 3sc, dec, (6sc, dec)*5, 3sc (42sc) 

68: (5sc, dec)*6 (36sc) 

69: 2sc, dec, (4sc, dec)*5, 2sc (30sc) 

70: (3sc, dec)*6 (24sc) 

71: 1sc, dec, (2sc, dec)*5, 1sc (18sc) 

72: (1sc, dec)*6 (12sc) 

Fasten and cut the thread, leaving a long tip with which to pull off the remaining hole. The tail of the thread is hidden inside the head. 

Ears: 

Link the two details in gray. 

No need to stuff. 

1: Magic ring 6sc 

2: (1sc, inc)*3 (9sc) 

3: (2sc, inc)*3 (12sc) 

4: (5sc, inc)*2 (14sc) 

5: (6sc, inc)*2 (16sc)  

6: (7sc, inc)*2 (18sc) 

7: (8sc, inc)*2 (20sc) 

Thread to fasten, cut, leaving long end for sewing. 

Muzzle: 

Knit white. 

1: Magic ring 6sc 

2: 6inc (12sc) 

3: (1sc, inc) * 6 (18sc) 

4: 1sc, inc, (2sc, inc) * 5, 1 inc (24sc) 

5: (3sc, inc) * 6 (30sc) 

6:30 sc 

Thread fasten, cut, leaving a long the end for sewing. 

First you need to sew the muzzle. 

Locate the face approximately between 51 and 61 next heads, pin pins (make sure that it is located in the center). 

Sew, in the process of sewing inside, put the filler. 

On both sides of the muzzle sew eyes. To do this, mark with pins. the locations of the peepholes, which are between 59 and 60 near the head, the distance between the points is 10-11sc. When sewing, make a small tie White thread stitches around the peephole to look turned out to be more “alive”. Black thread you can add eyelid rather. 

On the muzzle with pins mark the location of the nose, embroider with pink thread. 

Embroider mouth with black thread, eyebrows and antennae. 

Pins mark the location of the ears, sew approximately between 61 and 70 next (make sure the ears are sewn symmetrically). 

Trousers: 

Knitting pants starts at the top. 

Color “jeans” dial a chain of 

54ch and with the help of ss to close it in a circle. 

1: 2ch lifting, 54DC, sl-st 

2: (8sbn, surf) * 6 (60sbn) 

3-7: 60sc 

In the next row you need to do hole for the tail. 

8: dial a chain of 6ch, 6sc previous row skip, continue knitting in the next loop, 54sc (60sc) 

9-18: 60sc 

Next, knitting is divided as follows: 

28sc (pant leg), 2sc, 28sc (pant leg), 2sc. It is necessary to arrange the leg so that the hole for the tail was exactly in the middle. 

For this I needed to knit 4sc (maybe you will have a different amount loops), then count down 28sc and connect to a circle. Continue knitting already at 28 loops. 

19-29: 28sc 

Finish knitting ss, fasten and cut the thread, hide thread tip. 

Next, go back to the beginning of knitting trousers, count off from the first 2 sc (this will be the distance between them), tie the thread, leaving a loose tail about 20cm. 

Count off 28sc, use sl-st to connect in a circle and knit again 11 rows of 28sc. 

Next, finish the knitting sl-st, fasten and thread cut off, the tip of the thread hide. 

Sew up the tip of the thread distance between the legs. 

Pocket: 

Knit in rotating rows, each row start with a 1ch climb. 

Dial a chain of 10ch + 1ch lifting. 

First row start from the 2nd from hook loop. 

1-8: 10sc 

To tie the sides of the pocket sbn thread fasten and cut off leaving a long tip for sewing on 

Webbing: 

Tie 2 pieces of the desired length. To me it took to dial 28ch maybe you will have a different amount 

(depends on the density of knitting). Knit in rotating rows. When typing initial chain, leave free tail about 20cm. 

Dial a chain of 28ch + 1ch lifting. 

First row start from the 2nd from hook loop. 

1: 28sc, 1ch lifting 

2: 28sc 

Thread to fasten and cut, leaving tip for sewing. 

Sew the straps to the pants, front sew decorative buttons. 

Sew a pocket. 

Beret: 

Knit white: 

1: Magic ring 6sc 

2: 6inc (12sc) 

3 : (1sc, inc) * 6 (18sc) 

4 : (2sc, inc) * 6 (24sc) 

5 : (3sc, inc) * 6 (30sc)  

6 : (4sc, inc) * 6 (36sc) 

7 : (5sc, inc) * 6 (42sc) 

8 : (6sc, inc) * 6 (48sc)  

9: (7sc, inc) * 6 (54sc) 

10 : (8sc, inc) * 6 (60sc) 

11: (9sc, inc) * 6 (66sc) 

12 : (10sc, inc) * 6 (72sc) 

13 : (11sc, inc) * 6 (78sc) 

14: (12sc, inc) * 6 (84sc) 

15-17 : 84sc 

18 : (12sc, dec) * 6 (78sc) 

19 : (11sc, dec) * 6 (72sc) 

20: (10sc, dec) * 6 (66sc) 

21 : 66sc 

Finish knitting ss, fasten and thread cut off, the tip of the thread hide. 

Pompon: 

Knit in red, fill in the process knitting. 

1: Magic ring 6sc 

2: 6inc (12sc) 

3 : (1sc, inc) * 6 (18sc) 

4 : (2sc, inc) * 6 (24sc) 

5-8: 24sc 

9 : (2sc, dec) * 6 (18sc) 

10 : (1sc, dec) * 6 (12sc) 

Thread fasten, cut, leaving a long the end for sewing. 

Pompon sew to the top of the beret. 

Solitaire: 

On paper, make a pattern in the size indicated on the photo. 

Transfer the pattern to the fabric, leave the allowances of 0.7-1cm for hemming, cut. 

Process edges, bend and stitch 

Congratulations! 

Your kitty Jeremy is ready! 

I hope the process of creating it was easy and fun for you, and 

The result met all your expectations! 

Similar Posts